How to find us

i2S SA i2S_vision_plan_accès
Parc Technologique Europarc
28-30 rue Jean Perrin
33608 PESSAC CEDEX – France
phone +(33)(0)557 26 69 00
fax +(33)(0)557 26 68 99

Google Maps link and get directions…

To come to our head office in Pessac:

From Bordeaux Merignac International airport
- take the rocade (ring road) in the direction of Bayonne, exit 14

From the  Bordeaux St Jean Train Station (Paris is less than three hours away by TGV)
- take the rocade (ring road) in the direction of MérignacAirport, exit 14

To get to our office from the rocade (ring road), take exit n°14
(Z.I PESSAC Hôpital X.Arnozan Hôpital Haut LEVEQUE)

when approaching from the North on the west rocade (Paris, Mérignac)
Go straight at the first traffic light after the exit ramp. After approximately 700 meters you will come to a round-about. Take the third exit, with the Campanile restaurant on your left and the Europarc technology park on your right.
Continue for another 1.5 km, after which you will see our building on the right with its yellow-orange façade.

when coming from the train station or the south (Toulouse, Bayonne)
Turn left at the first traffic light after the exit ramp.
After approximately 80 meters, you will come to a second traffic light at which you need to turn right.
Around 700 meters further on, you will come to a round-about: take the third exit, with the Campanile restaurant on your left and the Europarc Technology park on your right.
Continue for another 1.5 km, after which you will see our building on the right with its yellow-orange facade.

  • Schott et Moritex annonce un nouvel objectif télécentrique g= 0.5X / distance de travail= 300mm

    Avec un grandissement de 0.5 X et une entrée pour éclairage coaxial cet objectif est particulièrement bien adapté pour des applications nécessitant peu d’espace de travail. 

    En savoir [+]

  • Matrox annonce la Radient eV-CXP une carte d’acquisition CoaXPress

    En combinant un design éprouvé avec une nouvelle interface, la carte Matrox Radient eV-CXP est une solution d’acquisition et de traitement performante et fiable. 

    En savoir [+]

  • Basler annonce des caméras USB3.0 pour 2012

    Depuis le mois de septembre Basler a dirigé le développement d'une nouvelle norme USB3 Vision pour les caméras industriels, les logiciels et les accessoires associés. 

    En savoir [+]

  • Matrox annonce des évolutions MIL 9.0

    Matrox améliore la lecture et la vérification des codes 1D/2D, révise le traitement d’images à base de GPU et supporte le protocole GenICam™ CL. 

    En savoir [+]

  • OPTO ENGINEERING propose le système optique TCCAGE

    Acquisition simultannée des 4 vues latérales d'un objet. 

    En savoir [+]

recommander imprimer